A gallbladder scan is a
nuclear scanning test that is done to check
gallbladder function. The scan can find blockage in the
tubes (bile ducts) that lead from the liver to the gallbladder and small
intestine (duodenum). See a picture of the
gallbladder and the
During a gallbladder scan, a
radioactive tracer substance is injected into a vein
in the arm. The liver removes the tracer from the bloodstream and adds it to
the bile that normally flows through the bile ducts to the gallbladder. The
gallbladder then releases the tracer into the beginning of the small intestine.
A special camera (gamma) takes pictures of the tracer as it moves through the
liver, bile ducts, gallbladder, and small intestine.
A gallbladder scan is done to:
Before your gallbladder scan, tell your
Do not eat or drink for 4 to 12 hours before a gallbladder
scan. Your doctor will tell you how long depending on what the test is being
You may be asked to sign a consent form before the test.
Talk to your doctor about any concerns you have regarding the need for the
test, its risks, how it will be done, or what the results will mean. To help
you understand the importance of this test, fill out the
medical test information form(What is a PDF document?).
A gallbladder scan is usually done by a
nuclear medicine technologist. The scan pictures are usually interpreted by a
nuclear medicine specialist.
You will need
to remove any jewelry that might interfere with the scan. You may need to take
off all or most of your clothes, depending on which area is being examined (you
may be allowed to keep on your underwear if it does not interfere with the
test). You will be given a cloth or paper covering to use during the
The technologist cleans the site on your arm where the
radioactive tracer will be injected. A small amount of the radioactive tracer
is then injected.
You will lie on your back on a table and a large
scanning camera will be positioned closely above your abdomen. After the
radioactive tracer is injected, the camera will scan for radiation released by
the tracer and produce pictures as the tracer passes through your liver and
into your gallbladder and small intestine. The first pictures will be taken
right after the injection. The pictures may be continuous (like a video) or may
be taken once in a while for up to the next 1½ hours. Each scan takes only a
few minutes. You need to lie very still during each scan to avoid blurring the
pictures. The camera does not produce any radiation, so you are not exposed to
any more radiation while the scan is being done.
(cholecystokinin) that stimulates the gallbladder may also be injected into
your vein during the scans. The pictures taken after this injection can help
determine whether the gallbladder is functioning normally. Computer analysis of
the data may be used to check gallbladder function. You may be asked to
answer questions about your reaction to the cholecystokinin. Occasionally
medicine (morphine sulfate) is given to help diagnose inflammation of the
Depending upon your results, additional scans may be
taken up to a day later. If you need to return for another gallbladder scan,
you should not eat any fatty foods before you return.
gallbladder scan takes about 1 to 2 hours.
You may feel nothing at all from the
needle puncture when the tracer is injected, or you may feel a brief sting or
pinch as the needle goes through the skin. Otherwise, a gallbladder scan is
usually painless. You may find it hard to remain still during the scan.
Ask for a pillow or blanket to make yourself as comfortable as possible before
the scan begins.
The test may be uncomfortable if you are having
abdominal pain. Try to relax by breathing slowly and deeply.
cholecystokinin is used during the test, it may cause nausea or abdominal pain.
The technologist may ask you about changes in your pain during the test.
Allergic reactions to the radioactive
tracer are rare. Most of the tracer will be eliminated from your body (through
your urine or stool) within a day, so be sure to promptly flush the toilet and
thoroughly wash your hands with soap and water. The amount of radiation is so
small that it is not a risk for people to come in contact with you following
Occasionally, some soreness or swelling may develop at
the injection site. These symptoms can usually be relieved by applying moist,
warm compresses to your arm.
There is always a slight risk of
damage to cells or tissue from being exposed to any radiation, including the
low level of radiation released by the radioactive tracer used for this
A gallbladder scan is a special
nuclear scanning test that is done to check
gallbladder function. The results of a gallbladder
scan are available in 2 days.
The radioactive tracer flows evenly through
the liver and then into the gallbladder and the beginning of the small
The gallbladder is normal in size, shape,
The tracer may not be removed normally from
the bloodstream by the liver, meaning possible liver disease.
The gallbladder does not contract or empty normally.
The tracer may not reach the gallbladder,
meaning inflammation or blockage of the duct by a
The tracer may not reach the beginning of
the small intestine (duodenum), meaning blockage of a bile duct by a stone,
a tumor, infection, or inflammation of the
pancreas. See a picture of a
Pain occurs when the gallbladder empties
Reasons you may not be able to have the test or why the results may not be helpful include:
Other Works ConsultedChernecky CC, Berger BJ (2008). Laboratory Tests and Diagnostic Procedures, 5th ed. St. Louis:
Saunders.Fischbach FT, Dunning MB III, eds. (2009).
Manual of Laboratory and Diagnostic Tests, 8th ed.
Philadelphia: Lippincott Williams and Wilkins.Pagana KD, Pagana TJ (2010). Mosby’s Manual of Diagnostic and Laboratory Tests, 4th ed. St. Louis: Mosby Elsevier.
October 17, 2012
Adam Husney, MD - Family Medicine & Howard Schaff, MD - Diagnostic Radiology
To learn more visit Healthwise.org
© 1995-2012 Healthwise, Incorporated. Healthwise, Healthwise for every health decision, and the Healthwise logo are trademarks of Healthwise, Incorporated.